Re: Raymarine ST60 Multi does not convert from NMEA Input to Seatalk
Kees Verruijt 20 May 2005 00:36:46
Carsten.Borchardt@web.de wrote:> Hi,>
I have a GPS with NMEA0183 connected to my Raymarine ST60 Multi.> In the manual is written, that this GPS data will be transmitted> to SEATALK by the ST60 Multi. But unfortunately I still have no> GPS-Data in my other SEATALK Instruments.>
The GPS-data are displayed on my ST60 Multi, therefore the NMEA> connection is correct. But the VHF (RAY 240) does not display the> Position and the ST60 Wind instrument does not show or transmit> the true wind speed. The wind data are displayed at the ST60 Multi.> The SEATALK connection to the ST60 Multi must be correct, too.
Your ST60 wind instrument uses speed through the water, coming from a ST 60 speed instrument, and not SOG from a GPS, as it's source to compute true wind speed. See the history of this newsgroup for more references and discussions on this.
I don't have any experience with the VHF 240 so wouldn't know what that part of your problem is. Once the GPS data is available in the multi, it will be on the seatalk bus as well. One possible remaining issue is that your VHF-240 isn't (correctly) connected to the seatalk bus. Can you see anything else on it?
